Test Consisting of four general purpose test areas, Nammo Talley, Inc. conducts development, engineering and production testing to support Talley's ballistic test requirements and provide Data Acquisition. Rocket Sled & Acoustic Enclosure Test Areas 209 ft. sled track with water brake 30 ft. rocket catapult sled fixture with water brake 15 ft. diameter, 5 ft. deep dispersion pit with overhead and side camera mounting 6 ft. x 10 ft. flat surface, 200,000 lbf reaction fixture with overhead and side camera mounting 'Yankee' Extraction Motor motor fixture 6 ft. diameter x 10 ft. long dirt bunkered concrete tunnel 4 ft. x 4 ft. large bonfire test stand Pendulum recoil test pad 20 ft. x 12 ft. by 7 ft. high concrete walled acoustic level enclosure for weapon tests Projectile soft capture structure Weapon Firing and Rocket Motor Test Areas 4 ft. diameter x 5 ft. long altitude chamber (90,000 ft simulation with full instrumentation) F-111 motor 3 axis fixture (50,000 lb load) Seat back rocket motor test stand Underseat rocket motor test stand Baseburn ignition delay fixture 100,000 lb thrust stand Three adaptable general purpose, 1 ft thick, steel reinforced concrete, test bays 12 ft. x 10 ft. x 8 ft. high, 2 ft. thick steel reinforced concrete bunker (2 lbs high explosive rating) Full instrumentation and data acquisition capability in bunker · 50 meter weapon range 10 ft. x 10 ft. x 3 ft. deep concrete test pad with 12 ft. overhead camera mounting Multi-Use Test Area Store ejector rack test fixture with drop capacity of 1000 lbs Man/seat separation fixture (air crew escape function) Small closed bomb fixture for propellant evaluation · 4,000 lbf strap pull test fixture 10,000 and 50,000 psi hydrostatic test stands 40 ft. drop tower 30 ft. diameter x 20 ft. high chain link enclosure with 15 ft. overhead camera mounting 23,000 rpm spin fixture for M913 / M927 Time Delays Enclosed Tank & Small Device Testing 60 liter test tank (auto inflator function) 1 cubic ft. test tank (auto inflator function) 100 cubic ft. test tank (auto inflators and modules) Hot and cold conditioning chambers (-100°F to +400°F) Programmable temperature and humidity chambers Image Acquisition Four 16mm high speed film cameras (500 up to 10,000 fps) 35mm still cameras Analog and Digital Video capabilities Two high speed video cameras (up to 2,000 fps) Safety monitor video and record capability in all test areas Digital still cameras Non-Linear Video Editing System